Categories

Hot Products

Crane Lifting Equipment Parts

Wire Rope Wedge Socket

The wedge socket for wire rope is a kind of component suitable for all kinds of cranes, which is used for fixing, fastening or connecting the end of the wire rope. It has the characteristics of simple structure, convenient use, safety and reliability. The KLR-503 wedge socket produced by......
Chat Now

The wedge socket for wire rope is a kind of component suitable for all kinds of cranes, which is used for fixing, fastening or connecting the end of the wire rope. It has the characteristics of simple structure, convenient use, safety and reliability. The KLR-503 wedge socket produced by Xinxiang Changjiang Hoisting Machinery Co., Ltd. is completely cast according to GB/T5973-2006 (GB/T5973-1986) standard. The wedge socket is made up of: wedge sleeve, wedge core, cross pin. The surface should be smooth and flat, the sharp edges and risers are removed, and there are no defects that reduce strength and obvious damage to the appearance (such as pores, cracks, looseness, slag inclusions, sand inclusions, castings etc.), and the wedge sockets should be made anti-rust treatment. Our Changjiang Company conducted two tensile tests on each of the nominal size wedge socket samples before production. The test is pre-tensioned and then gradually loaded to the breaking load. During the loading process, the length of the free end of the steel wire cannot be shortened. After the test, the wedge sleeve and the wedge are not allowed to find crack or any other damage affecting the use. In batch production, the factory-test is also carried out for each nominal size wedge socket. The number of tests is 2% of the batch, and the number is not less than 2, all the test pieces must meet the requirements, then the batch of products is qualified; if one of the samples does not meet the requirements, the sampling test shall be doubled. If the test does not meet the requirements, the batch of products is unqualified. The wedge sockets that conform to the sample test are inspected by the technical inspection department of the manufacturer, and the manufacturer shall check the dimensions, materials, technical requirements, signs etc. of each wedge socket. The manufacturer shall ensure that each wedge socket meets the standard requirements. Mass production wedge sockets supplied to the market should be accompanied by a product quality certificate. The main specifications are: 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 24mm, 26mm, 28mm, 32mm, 36mm, 40mm. Marking example: Wedge B/T5973-20

Hot Tags: Wire Rope Wedge Socket, suppliers, manufacturers, factory, custom, for sale
  • QR CODE
  • facebook