Weld-On Anchor Hook is Ideal for welding to construction equipment, trailers, wreckers and roll backs.
It is closed die forged. Closed die forging produces consistent dimensions. A closed die forged bow allows for an increased cross section that, when coupled with quench and tempering, enhances strength and ductility. Close tolerance holes and spare parts with good surface finishes are provided and are proven to provide improved fatigue life in actual use. They are fatigue rated as well as load rated. Close pin to hole tolerance has been proven to be critical for good fatigue life.
Widely used in any lifting conditions, trailer conditions
Easier to be connected with chains, wire ropes, hooks,shackles,etc
Stronger performance during working
Many sizes can be choosed according to the different daily working
Process: Forging, quenched&tempered
Material: alloy steel
Safety factor: 5:1
W.L.L: 1TON-10TON (other size can be customzied)
Finish: powder coated/galv/hot dip galv/black treatment
Other size can be available.
CAUTION: Do NOT use Breaking Strength for design or rating purposes. Use Working Load Limit instead. It assumes no responsibility for the use, misuse or misapplication of its products. All products are sold with the package understanding that the purchaser and/or user are thoroughly familiar with their proper use.
SPECIFICATION FOR WELD ON ANCHOR HOOK